image345
pgtop2
insales@jacklinsteel.com
HSLA-High Strength Low Alloy
HR A1011 HSLA-F Grade 50/60               Please inquire if size or length not listed.
Sheet               Some sizes listed not readily available.
Mill Edge Width                ****  Please inquire for availability ****
(old spec A607)  
     
HLSA
Nominal  GRADE 50/60
Thickness & Size in inches Wt. per Sq. Ft. Est. Sheet Weight ITEMID
7 Ga. (.1793)   7.500  
7ga 48 x   96     7.500 240.0 2607400
7ga 48 x 120    7.500 300.0 2607425
7ga 48 x 144    7.500 360.0 2607450
     
10 Ga. (.1345)   5.625  
10ga  48 x   96     5.625 180.0 2610400
10ga  48 x 120    5.625 225.0 2610425
10ga  48 x 144    5.625 270.0 2610450
10ga  60 x   96     5.625 225.0 2610590
10ga  60 x 120    5.625 281.3 2610625
10ga  60 x 144    5.625 337.5 2610650
10ga  60 x 240    5.625 562.5 2610675
10ga  72 x   96    5.625 270.0 2610815
10ga  72 x 120    5.625 337.5 2610825
10ga  72 x 144    5.625 405.0 2610840
10ga  72 x 240    5.625 675.0 2610865
     
11 Ga. (.1196)   5.000  
11ga 48 x   96     5.000 160.0 2611400
11ga 48 x 120    5.000 200.0 2611425
     
12 Ga. (.1046)   4.375  
12ga  48 x  96     4.375 140.0 2612400
12ga  48 x 120    4.375 175.0 2612425
12ga  60 x  96     4.375 175.0 2612525
12ga  60 x 120    4.375 218.8 2612625
     
14 Ga. (.0747)   3.125  
14ga 48 x  96     3.125 100.0 2614400
14ga 48 x 120    3.125 125.0 2614425
     
16 Ga. (.0598)   2.500  
16ga 48 x  96     2.500 80.0 2616400
16ga 48 x 120    2.500 100.0 2616425
Additional Grades/Processes Produced: 
A606 Type 4, A1011-F Grade 80, 
*** Please inquire with Salesperson for availability ***